www.RodsDepot.com
We make different styles of rods products to fit your specific need!
Distributed by IBYOutlet.com
Call now: 281-440-5555 Midland/Odessa: 432-6141168 Fax. (713)583-8020 Quote@IBYoutlet.com

Pony Rods
BlackGold pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Standard lengths: 2' (.61 m), 4' (1.22 m), 6' (1.83 m), and 8' (2.44 m). Other lengths are available on special order.
Loads
- Light = 0 psi to 24,650 psi (0 Mpa to 172 Mpa)
- Medium = 24,650 psi to 34,800 psi (172 Mpa to 241 Mpa)
- Heavy = 34,800 psi to 42,050 psi (241 Mpa to 290 Mpa)
- Extra Heavy = 42,050 psi and greater (290 Mpa)
Seating Depth
- Shallow = 0 feet to 4,002 ft. (1219 m)
- Medium = 4,002 feet to 6,986 feet (1219 m to 2134 m)
- Deep = 6,986 feet and deeper (2134 m)
Chemical Properties of Steel Sucker Rods and Pony Rods
Physical Properties for Steel Sucker Rods and Steel Pony Rods
Steel Sucker Rod Selection Guide (by grade)
Grade C: Designed for light-to-medium loads in shallow-to-medium depth wells and non-corrosive or effectively inhibited corrosive well fluids.
Grade K: light-to-medium loads in shallow-to-medium depth wells where corrosion is a problem and must be effectively inhibited.
Grade D: heavy rod loads or deep wells in mild-to-medium corrosive well fluids that are effectively inhibited against corrosion.
Grade KD: medium-heavy rod loads or deep wells in corrosive well fluids that are effectively inhibited against corrosion.
Grade HL and HY: Designed for heavy-extra heavy loads at any depth in corrosive fluids that are effectively inhibited against corrosion.
Grade KH: Designed for extra heavy loads at any depth and fluids that are effectively inhibited against corrosion.
Steel Sucker Rod Selection Guide Illustration


15819 Tuckerton Rd., Houston, TX 77095, USA
Unit 101, 3912 - 77 Ave, Leduc, AB, Canada T9E 0B6
12504 Hwy 191, Midland, TX 79707